Search the library
Find reliability topics fast
Search across 192 technical insights, blog posts, brand hubs, buying guides, and reliability pages by symptom, engine, gearbox, brand, or system.
49 results
Showing matches for "BMW 1 Series".
P0017: Crankshaft / camshaft timing correlation, bank 1 sensor B
The exhaust-camshaft and crankshaft signals on bank 1 are outside their expected relationship.
P0301: Cylinder 1 misfire detected
The ECU detected repeated combustion misfires on cylinder 1.
P0671: Cylinder 1 glow-plug circuit
The glow-plug circuit for cylinder 1 has an electrical or current-consumption fault.
P2195: Oxygen sensor signal stuck lean, bank 1 sensor 1
The upstream oxygen sensor on bank 1 remains at a lean indication despite ECU correction.
P0030: Heated oxygen sensor heater control circuit, bank 1 sensor 1
The ECU detects an electrical fault in the heater circuit for the upstream oxygen sensor.
P261A: Coolant pump B control circuit open
The ECU detects an open circuit in an auxiliary or electrically driven coolant-pump circuit.
P0340: Camshaft position sensor circuit, bank 1
The ECU is missing or cannot trust the camshaft position signal on bank 1.
C1112: ABS pump motor or supply circuit fault
The brake-control module detects a fault in the ABS pump motor circuit or its power supply.
C1130: Chassis control or suspension pressure fault
A chassis or suspension control module has detected an implausible pressure, height, or control-state condition.
P0011: Intake camshaft timing over-advanced, bank 1
The intake camshaft is more advanced than the ECU expects for the current operating condition.
P0014: Exhaust camshaft timing over-advanced, bank 1
The exhaust camshaft position is more advanced than commanded or is slow to return to the expected position.
P0016: Crankshaft / camshaft timing correlation
The ECU sees the crankshaft and camshaft signals outside their expected relationship.
P0101: Mass-air-flow signal range / performance
Airflow reported by the MAF sensor does not agree with the ECU's calculated operating conditions.
P0102: Mass-air-flow circuit low input
The MAF sensor signal is lower than expected for the engine speed and load.
P0106: Manifold absolute pressure range / performance
The MAP sensor signal does not match the pressure expected from throttle position, boost, engine speed, and airflow.
P0113: Intake-air temperature sensor circuit high
The ECU sees an intake-air temperature signal that is higher voltage than expected, often interpreted as an unrealistically cold reading.
P0118: Engine coolant temperature sensor circuit high
The coolant-temperature signal is implausibly high voltage, often read by the ECU as extremely cold coolant.
P0121: Throttle / pedal position sensor range / performance
The ECU sees a throttle or accelerator-position signal that is outside the expected relationship.
P0128: Coolant thermostat below regulating temperature
The engine is taking too long to reach expected operating temperature or is running cooler than the ECU expects.
P0130: Oxygen sensor circuit malfunction, bank 1 sensor 1
The upstream oxygen or lambda sensor signal is implausible, missing, or outside the control range expected by the ECU.
P0135: Oxygen sensor heater circuit, bank 1 sensor 1
The upstream oxygen sensor heater circuit is not operating as expected.
P0141: Oxygen sensor heater circuit, bank 1 sensor 2
The downstream oxygen sensor heater circuit is not reaching expected operation.
P0171: System too lean, bank 1
Fuel trim has reached a lean threshold because the ECU is adding more fuel than expected.
P0172: System too rich, bank 1
Fuel trim has reached a rich threshold because the ECU is removing more fuel than expected.
P0191: Fuel rail pressure sensor range / performance
The rail-pressure signal is implausible or does not follow commanded pressure correctly.
P0217: Engine coolant over-temperature condition
The engine controller recorded coolant temperature above its safe operating threshold.
P0401: Exhaust-gas recirculation flow insufficient
Measured or inferred EGR flow is lower than the controller expects.
P0411: Secondary-air injection incorrect flow
The ECU does not see the expected oxygen-sensor response when the secondary-air system runs on cold start.
P0420: Catalyst efficiency below threshold, bank 1
Upstream and downstream oxygen-sensor behavior suggests insufficient catalyst oxygen-storage performance.
P0441: EVAP purge flow incorrect
The fuel-vapor purge system flow is not matching the ECU's commanded behavior.
P0471: Exhaust pressure sensor range / performance
The exhaust-pressure sensor signal is implausible for engine load, speed, and DPF pressure conditions.
P0480: Cooling fan control circuit 1
The ECU cannot control or verify the primary electric cooling-fan circuit.
P0544: Exhaust-gas temperature sensor circuit, bank 1 sensor 1
The ECU sees an electrical fault in an exhaust-temperature sensor used to protect the turbo and emissions system.
P0641: Sensor reference voltage A circuit open
A shared 5-volt reference circuit for engine sensors is missing, shorted, or pulled out of range.
P0715: Input / turbine speed sensor circuit
The transmission controller cannot trust the input or turbine speed signal.
P0741: Torque converter clutch stuck off / performance
The torque converter clutch is not locking as expected or slip remains too high.